Stainless steel seamless concentric reducer DN50 60,3 x 2,9mm / DN40 48,3 x 2,6mm in grade 1.4301 / 304 / 1.4307 / 304L

Stainless steel seamless concentric reducer DN50 60,3 x 2,9mm / DN40 48,3 x 2,6mm in grade 1.4301 / 304 / 1.4307 / 304L

15,86 € (12,89 € excl. VAT)

  • Availability: in stock
OD
DN50 / 60.30mm
Wall
2.9mm
Smaller OD
DN40 / 48.30mm
Grade
1.4301 / 1.4307 / 304 / 304L
SKU: S-RDK-M/060.30X2.90/048.30X2.60/1.4307 Category:

Description


Stainless steel seamless concentric (symmetric) reducer

Size 1 DN50 – 60.3 x 2.9 mm (Outside diameter x Wall thickness)
Size 2 DN40 – 48.3 x 2.6 mm
Other dimensions see in table
Weight 0.33 kg
Steel grade 1.4301 / 304 / 1.4307 / 304L
Norm DIN2616-2/ EN 10253-4
Available certificate 3.1
Product code S-RDK-M/060.30X2.90/048.30X2.60/1.4307


More about concentric reducers:

These metallurgical products are applied to change the diameter of the pipeline. Their use does not disturb the flow of liquids or other substances. Another name for this type of stainless reduction is symmetrical reducers. The shape of the wall of the stainless steel concentric reductions has the shape of a straight cone, in contrast to the eccentric reducurers, the wall of which has the form of a spherical cone. Stainless steel concentric reducers are chosen by installers because of their good fluid kinetics.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Dimensional tolerances

Seamless concentric reducers, DIN 2616, DIN EN 10253-4/A or B: D = 60.3mm, D2 = 48.3mm.

DimensionLimits (per document)For this product
[s] Wall thickness≤ 4 mm: 12.5% / + 20%; > 4 mm: 12.5% / + 15%–
[D] Outside diameter± 1.0% or ± 0.5 mm, whichever is greater (tolerance class EN D2)D: ± 0.603 mm; D2: ± 0.5 mm
[L] Construction length≤ 219.1 = ± 2 mm± 2 mm
[X] Fit-up geometry1% of the outside diameter or 1 mm, whichever is greater1 mm

The value for this product is read from the document for its outside diameter; “ – ” means the document gives no separate value for this diameter – the limit in the middle column applies.

Source: Seamless concentric reducers, DIN 2616, DIN EN 10253-4/A or B (PDF, in Polish); tolerance class D2: Dimensional tolerances for pipes

Same DN50 / 60.30mm, other grade

The same size in other grades from stock

Same grade, other size

Other sizes in grade 1.4301 / 1.4307 / 304 / 304L